Scalextric parts contacts and silicon wire for G38 round guide plates

These Scalextric guide blade contacts with high flex silicon wire attached are direct replacements for the original Scalextric parts used for the modern round guide plates. These contacts and wires have been used extensively on Scalextric cars from 2003 to the present. These wires can be soldered to the motor tabs directly or joined to the existing pick-up wires.

These contacts are suitable for the Scalextric Start range of cars.

This Scalextric guide assembly is sometimes referred to as G38.

Replacement Scalextric guide kits are available

Replacement guide plates with braids fitted are available

Scalextric spare parts from Scalextric Car Restorations

Crimp Failure at Braid Contact on Scalextric cars from 2016 onwards

Introduction For a scalextric car to operate the electrical current must flow into and out of the car. That's two discrete electrical connections. To do this the slot rails in the track are the two conductors. The electric current connects to the car via the flexible woven braids fitted to the guide blade, then to the braid contact plates and then through wires to the motor. The rotation of the guide blade for corners and the like is managed through the use of the flexible wires. The wires need to be securely fixed to the braid contact plate to make the electrical connection and to withstand the regular rotation of the guide blade.
Recently (we believe sometime in 2016) Scalextric introduced a change in the way the wire is crimped to the braid contact plate. This is the silver coloured plate that makes contact with the braid. There is a very serious problem with this new design of crimp. There is insufficient length to the crimp fingers to fully secure the outer insulation of the wire. With the action of the guide rotating over time the wire pulls out of the crimp. This breaks the electrical connection between the wire and the braid contact plate. Once the crimp has failed the Scalextric car stops on the track.
	Here is a close-up picture showing the failed condition. As this is a design based problem the repair is not as simple as it might appear. Option 1. Simply re-make the crimp. This will last for a short while until the crimp fails again. Option 2. Just crimp onto the conductor wire strands. This will last for a short while until the wire strands break through the action of metal fatigue. Option 3. Solder the wire to the braid contact plate. This doesn't work as the latest braid contact plate is plated in a material that doesn't take solder. There'd also be the strain relief problem.
As shown in this picture to make the electrical contact the insulation is removed and the end of the wire strands are tinned with solder and bent back over the insulation. That's why the electrical contact fails once the crimp fails. As this is a design based problem the solution must also be design based. That means a new design of connection.
	The solution is to use a new braid contact plate made from a slightly stronger steel that is plated with a thin layer of brass. This will take solder. To overcome the lack of strain relief with this soldered solution a short length of ultra-flexible silicon wire is used. This wire consists of 128 strands of 0.05mm diameter copper and a silicon insulating layer. This is flexible enough to easily withstand all the movement of the guide blade.
Here is the repair complete in the Scalextric car. The original green and yellow wires are shortened to make the room for the silicon wire tails. The joints are soldered and a length of insulating tape covers the exposed joint. We freely admit this isn't pretty but it does use the right materials in the correct Engineering environment. Stronger brass plated steel braid contact plates. Solder joints. Ultra-flexible wire where the wires are needed to move regularly.
About the author: Gary Harding has been working with Scalextric cars for over 35 years and now operates Scalextric Car Restorations in the UK. Scalextric Car Restorations is a Worldwide internet based business that offers for sale high quality Scalextric cars and Scalextric parts from the 1960s to the present day. All the restoration work is carried out to the highest standards with the highest quality parts available. Only the best cars are selected and the final result is a car that is genuinely like new. Further help and advice relating to this article or Scalextric cars in general can be found at: http://www.scalextric-car.co.uk

C8312 Scalextric start guide blade with braid plate

These Scalextric C8312 pick up assemblies are replacements for the Scalextric Start cars.

 

Ref.	Description
C3139	Rally car blue
C3139	Rally car red
C3140	GT endurance car white
C3140	GT endurance car black
C3141	Single seater car red
C3141	Single seater car white
C3164	GT car pro-racing yellow
C3164	GT car pro-racing red
C3186	Disney Cars Lightning McQueen
C3187	Disney Cars 2 Francesco Bernoulli

Scalextric spare parts from Scalextric Car Restorations

Guide blade for vintage Scalextric C76 Mini Cooper FWD

Announcing the remanufacture of the guide blade for vintage Scalextric C76 Mini Cooper FWD.
These Scalextric guides are direct replacements for those used on the vintage Scalextric C76 Mini Cooper FWD. This guide plate is sometimes referred to as G6.
This replacement guide pin for the Scalextric C76 Mini Cooper FWD model is moulded in Carbon Fibre reinforced black plastic.


Another new product from Scalextric Car Restorations

Guide blade for vintage Scalextric C74 and C75

Guide pin for the vintage Scalextric C74 Austin Healey 3000 and C75 Mercedes 190SL models.
These guide pins are direct replacements for those used on the vintage Scalextric C74 Austin Healey 3000 and C75 Mercedes 190SL. This guide plate is sometimes referred to as G5.
This replacement guide pin for the Scalextric C74 Austin Healey 3000 and C75 Mercedes 190SL is moulded in Carbon Fibre reinforced black plastic.

Ref.	Description	Quantity
C74	Austin Healey 3000	1
C75	Mercedes 190SL	1
C75	Mercedes 190SL Sports 007 set	1
C93	Austin Healey 3000 Race Tuned	1
C94	Mercedes 190SL Race Tuned	1

Scalextric parts from Scalextric Car Restorations

Guide blade upgrade kit for vintage Scalextric C74 and C75

This guide blade upgrade kit is a direct replacement for the original Scalextric G5 guide pin fitted to the cars listed below. The kit comes complete with:

• Guide blade G30
• Braids (fitted)
• Braid pins (fitted)
• Wires (fitted)
• Motor electrical tags (fitted)
• Guide adaptor bracket

The original guide pin fitted to these Scalextric cars cannot readily be used on modern track with crossovers, points etc. as the pin is small and the car can change lanes when traversing a crossover! This kit uses a later Scalextric guide blade which is needed to maintain the right direction of travel on modern track obstacles.
No soldering is required as this kit simply fits into place with only basic tools. The original car body and motor are used with no changes at all, which means the original guide pin can be refitted at any time to return your Scalextric car to it’s original condition.
With this kit you can enjoy your original Scalextric Austin Healey 3000 and Scalextric Mercedes 190SL models on later Scalextric Classic track and even new Scalextric Sort track layouts.
The original guide pin is sometimes referred to as G5.
Another great solution from Scalextric Car Restorations

Guide blade G15 for vintage Scalextric Spanish built cars

This Scalextric guide blade is a direct replacement for the vintage Scalextric Spanish built cars.

These new Scalextric guides are direct replacements for those guide blades used on the vintage Scalextric Spanish built cars of the 1960s and 1970s. These guide blades are re-manufactured in white plastic and are sometimes referred to as G15.

Ref.	Description	Quantity
C32	Mercedes 250SL Race Tuned	1
C34	E Type Jaguar	1
C36	Honda GP	1
C37	BRM F1	1
C41	Ferrari GT 330	1
C43	McLaren M9A	1
C44	Mercedes Wankel C111	1
C46	Porsche 917K	1
C48	Tyrrell Ford	1

 Another great spare part from Scalextric Car Restorations

Replacement of a damaged Scalextric round guide blade

	This Scalextric Subaru Impreza was in good overall condition except for a damaged round guide blade and a broken braid contact plate. The lights all worked as did the 4 wheel drive system.
From the underside of the Scalextric Subaru Impreza the damaged round guide blade and missing contact plate can be seen. The 4 wheel drive belt can also be seen on the left of the picture just on the inside of the wheel.
	With the body of the Scalextric Subaru Impreza removed the motor, lights PCB and guide fixing screw can all be seen. Also, the broken guide contact plate can be seen on the end of the wire.
Here the broken Scalextric guide blade contact plates have been removed. along with the broken Scalextric round guide blade. The wires have been prepared to solder to the replacement contact plates.
	The replacement contact plates for the round guide blade have been soldered to the original Scalextric wires. You can also see the replacement Scalextric C8420 round guide blade, braid disc, fixing screw and with this car a small spring that fits on the guide shaft.
The replacement contact plates have been fitted to the replacement Scalextric guide blade. These Scalextric Car Restorations replacement guide blade contact plates are stronger than the original Scalextric items as they are manufactured from thicker material.
	This is the inside of the repaired Scalextric Subaru Impreza. The replacement Scalextric C8420 round guide blade has been refitted with its spring and screw. The round braid plate has also been fitted. We took the opportunity to clean away all the fluff and dust that was inside too. Then a few drops of light lubricating oil and some grease on the gears. This Scalextric car is good to race once again.

Another great solution by Scalextric Car Restorations

New Scalextric cars and the guide blade contact failure

A growing problem with the newer Scalextric cars with the round guide blade is the connection between the contact piece and the motor wire breaking.  It also seems Scalextric know about this as they have used different techniques to make this connection since this round guide was introduced.

Initially the contact was a solder connection but this causes the wire to fracture adjacent to the solder joint.  This is caused by metal fatigue due to the constant movement of the joint and corrosion caused by the solder flux.
Then there was a phase of crimping the joint, which is technically the best way to make a joint of this type.  However, the crimping was not done properly so the wires would just pull out of the crimp.  Now there is a crimp and solder process, but soldering a crimp is difficult so the solder doesn’t always secure the joint properly and the wire just pulls out again.
The final problem we’ve seen is that the contact itself can snap between the crimp and the guide.  This is because the metal is too thin for the job, which might explain the failures of the crimp only jointing method.
We have available a replacement contacts that are made of thicker material with a solder tag to make the joint to the wire.  This is a direct replacement and upgraded part.  Also, available is a complete guide with wires already attached.
Another great insight from Scalextric Car Restorations